122
4.IMAGE ADJUSTMENT
4
1. Background Adjustment
This function allows you to adjust the density of the original’s background. It avoids the back side of 2-
sided originals becoming visible on the front side of the original through the copy.
• This mode cannot be used with the automatic copy density mode. ( P. 11 9 )
1
Place paper in the drawer(s).
2
Place the original(s).
3
Press the [IMAGE] button to enter the image menu, and then press the
[BACKGROUND ADJUSTMENT] button.
4
Press the [LIGHT] (or [DARK]) button to adjust the density, and then
press the [ENTER] button.
• Select other copy modes as required.
5
Press the [START] button.
Canceling the background adjustment
There are 2 ways to clear the setting.
• Press the [DEFAULT] button and then the [ENTER] button.
• Adjust the background level to “0”, and then press the [ENTER] button.
To Next Page
Loading...
