Page 18
Changing the Paper Size of the Drawer
1. Pull out the drawer carefully until it comes to a stop.
2. Push the lower part of the width guide in the direction
of the arrow to remove it; then reinstall the width guide
at the desired paper size (indicated on the bottom inner
surface of the drawer).
3. Push the arrow part (right side) of the size selection lever
to unlock it.
4. While pushing the size selection lever in the direction
of the arrow, set the side guide to the desired paper size
(indicated on the bottom inner surface of the drawer).
Adjust the side guides with both hands.
To Next Page
Loading...
