5. Using Template
76 Scanning Guide — Registering Scan Template
10. Press the [FUNCTION CLEAR] button on the control panel to
clear the settings in the scan menu.
Registering a scan template in a user template group
1. Press the [SCAN] button on the control panel to enter the
scan menu.
• The basic scan menu is displayed.
2. Press the buttons of the agent and set the scanning condi-
tions.
• For instructions on how to set each scan agent, see the instructions for each
scan mode.
P.22 "How to Perform Scan to e-Filing"
P.32 "How to Perform Scan to File"
P.44 "How to Perform Scan to E-mail"
NOTE: Do not press the [ENTER] button at this time.
To Next Page
Loading...
