5. Using Template
Scanning Guide — Registering Scan Template 77
3. Press the [TEMPLATE] button on the control panel to enter
the template menu.
• The screen to select a template group is displayed.
4. Press the [REGISTRATION] button.
5. Select a user template group name where you want to regis-
ter a new template, and press the [ENTER] button.
• When you press the user template group button that the password is not set,
the screen to select a template is displayed. If the screen to select a tem-
plate is displayed, skip to Step 7.
• If the password has been set to the selected user template group, the pass-
word input screen is displayed. If the password input screen is displayed,
continue to next step.
SUPPLEMENT: If you cannot find the desired user template group button in the screen, press the [Next]
button to switch the screen to find the desired user template group button.
To Next Page
Loading...
