4 Retrieving Documents
182 Viewing Documents with e-BRIDGE Viewer
Using e-BRIDGE Viewer
Using the e-BRIDGE Viewer, you can manage the files in the e-Filing boxes in the equipment as
well as the files in your computer.
P.182 “Configuring e-BRIDGE Viewer”
P.192 “Accessing Documents in e-Filing”
P.194 “Viewing Documents”
P.199 “Managing Documents”
Configuring e-BRIDGE Viewer
Before using the e-BRIDGE Viewer, it is recommended to configure the e-BRIDGE Viewer set-
tings.
Only the documents in the registered folders can be displayed using the e-BRIDGE Viewer. It is
required to perform the folder registration and it is recommended to configure e-Filing Box set-
tings before using e-BRIDGE Viewer. Please read the section carefully and configure the set-
tings as you require.
You can use the e-BRIDGE Viewer normally if you do not change the default settings in other
settings.
You can configure the settings in the Settings dialog box that can be displayed by selecting [Set-
tings...] in the Edit menu. The Settings dialog box includes the following setting windows.
1) Folder
In the Folder window, you can perform the folder registrations. Only the documents in the
registered folders can be displayed using the e-BRIDGE Viewer. Therefore, this must be
configured to view the documents using the e-BRIDGE Viewer.
P.183 “Configuring Folder Registrations”
2) e-Filing Box
In the e-Filing Box window, you can configure the connections to the equipment. This must
be configured to view the e-Filing documents in the equipment.
P.185 “Configuring e-Filing Box Settings”
3) File Types
In the File Types window, you can specify the file types that are displayed in the Document
View.
P.186 “Configuring File Types To Be Registered”
1
2
3
4
5
6
7
8
To Next Page
Loading...
