Using e-Filing Backup/Restore Utility 217
Running e-Filing Backup/Restore Utility
1
Click the [Start] menu, select [Programs], and click [TOSHIBA e-
STUDIO BackUp-Restore] in the [TOSHIBA e-STUDIO Client] pro-
gram folder.
y The e-STUDIO e-Filing Backup/Restore Utility Login dialog box appears.
When you are running the first time and the connection to the equipment has not been
configured, the TopAccessDocMon Local Discovery dialog box appears. If this dialog
box appears, configure the connection to the equipment.
P.217 “When You Are Running the First Time”
2
Enter the administrator’s password and click [OK].
3
The e-Filing Backup/Restore Utility main window appears.
— When You Are Running the First Time
When you access the e-Filing Backup/Restore Utility the first time, the TopAccessDocMon Local
Discovery dialog box appears. In this case, search the equipment in your network and configure
the connection.
You can also change a target device to backup or restore e-Filing data. To do this, you must add
an additional connection to the other equipment using the Local Discovery function.
P.230 “Adding a New Device Using Local Discovery”
To Next Page
Loading...
