5 System Administration
220 Using e-Filing Backup/Restore Utility
3
The entered printer is added in the list. Select the printers that you
want to monitor from the list and click [OK].
y The e-STUDIO e-Filing Backup/Restore Utility Login dialog box appears.
Configuring Discovery Settings
You can configure the discovery settings.
1) Devices
Click the arrow button to display the poll down list and check the model name that you want
to search.
This software can backup or restore the data only from the e-STUDIO3510c Series,
e-STUDIO451c Series, e-STUDIO850 Series, e-STUDIO452 Series, e-STUDIO282 Series,
e-STUDIO4511 Series, e-STUDIO350 Series, e-STUDIO280 Series
2) Network - Enable IPX/SPX Search
This is disabled because the e-Filing Backup/Restore Utility does not support the IPX/SPX
connection.
3) Network - Enable TCP/IP Search
Select this to search for devices connected to the TCP/IP network. This is available only
when the TCP/IP protocol is installed.
When this is enabled, select how it searches devices in the TCP/IP network.
- Search local subnet — Select this to search devices in local subnet.
To Next Page
Loading...
