Setting up User Management 287
y When user sends a print job while importing the user information, the alert message will be
displayed to tell that the equipment cannot receive the print job. When this equipment
receives a fax while importing the user information, this equipment cannot start receiving the
fax so that it continues ringing.
1
Click the User Management tab.
y The login page is displayed.
2
Enter “Admin” in the “User Name” field, enter the administrator
password in the “Password” field, and click [Login].
y The User Information List submenu page is displayed.
yUsers can also login using the user name, domain name (required only when Windows
Domain Authentication is enabled), and password that has been set as the Account
Manager in the User Information.
yYou do not have to select the “Domain Name” field when you log in as the Administra-
tor.
Rolebase
No No No
When the value is blank, the value is set to “0”.
0 = Disable, 1 = Enable
Set Limitation
No No No
When the value is blank or invalid value is entered, the
value is set to “OFF”.
Maximum reached No No No
Items
Win-
dows
Domain
LDAP Local Supplements
To Next Page
Loading...
