Setting up User Management 301
5
Select the LDAP server to be used for the authentication and select
the type of the LDAP server. Then click [Next].
Windows Server — Select this when LDAP is running on Windows server.
LDAP Server (Other than Windows Server) — Select this when the LDAP is running
the server other than Windows server. When this is selected, you have to specify the
attribute type of ‘User Name’.
The LDAP server to be used for the authentication must be configured in the Directory
Service submenu page in the Maintenance menu.
P.203 “Managing Directory Service”
To Next Page
Loading...
