Toshiba e-studio162 - Page 35

CONVENIENT COPY FUNCTIONS
33
4
Using the ADF/RADF
1
Place the originals. (p.21)
2
Press the [E-SORT/SP.FUN] key until
"2IN1" appears and then press the
[ENTER] key.
3
Press the [ ] key ( ) to move " " to
the "ON" position and then press the
[ENTER] key.
4
Press the [ ] key ( ) or [ ] key ( ) to
select the original size and then press the
[ENTER] key.
The following original sizes can be selected:
"8.5x14", "8.5x13", "8.5x11", "5.5x8.5", "A4", "B5",
"A5".
5
Select the number of copies and other settings, and press the
[START] key ( ).
The copy is delivered to the paper output tray.
• To cancel 2 IN 1 copying, press the [CLEAR] key ( ).
• To cancel 2 IN 1 copy mode, press the [CLEAR ALL] key ( ).
SPECIAL FUNCTION
2IN1
2IN1
ON OFF
ORIG. SIZE ENTER
5.5x8.5
Note