USER SETTINGS
63
7
4
AUTO SHUT-OFF
TIME
1: 5 MIN.
2: 30 MIN.
3: 60 MIN.
4: 120 MIN.
5: 240 MIN.
• This function automatically
switches the machine to a state
that consumes even less power
than preheat mode if the set
duration of time elapses without
the machine being used when
the power is on. All lights
except the power save indicator
go off. To resume normal
operation, press the [START]
key ( ). Normal operation
also resumes automatically
when a print job is received or
scanning is begun from a
computer. While in auto power
shut-off mode, no keys (except
the [START] key ( )) can be
used.
5
STREAM
FEEDING*
1
1: ON
2: OFF
• When copying using the ADF/
RADF, while "SET ORIGINALS
FOR STREAM FEEDING."
appears in the display after an
original has been scanned
(about 5 seconds), a
subsequent original can be
placed and automatically fed
into the machine.
6 LAYOUT IN 2IN1
1: PATTERN 1
2: PATTERN 2
• Use this setting to select the
layout pattern when two
original pages are copied onto
a single sheet of paper (see
page 31 for the layout
patterns).
7
OFFSET
FUNCTION
1: ON
2: OFF
• When enabled, this function
offsets the position in the
paper output tray of sets of
copies during copy job, and
print jobs when using the
printer function.
Program
number
Program name
Setting codes
(factory default
setting appears
in bold)
Explanation
*
1
When the ADF/RADF is installed.
To Next Page
Loading...
