Toshiba e-studio162 - Removing the Software

TROUBLESHOOTING AND MAINTENANCE
78
4
Select "FILE:" in the "Print to the following port" list box, and
click the "OK" button.
5
Click the "TOSHIBA e-STUDIOXXXX" printer driver icon and
select "Properties" from the "File" menu.
6
Click the "Ports" tab.
In Windows 98/Me, click the "Details" tab.
7
Select "LPT1" in the "Print to the following port" list box, and
click the "OK" button.
Removing the software
If you need to remove the software, follow these steps.
1
Click the "start" button and then click "Control Panel".
In Windows 98/Me/NT 4.0/2000, click the "Start" button, select "Settings",
and then click "Control Panel".
2
Click "Add or Remove Programs".
In Windows 98/Me/NT 4.0/2000, double-click the "Add/Remove Programs"
icon.
3
Select "TOSHIBA e-STUDIO151/151D/162/162D Series MFP
Driver" and Button Manager from the list, and remove the
software.
For more information, refer to your operating manual or to the help files for
your operating system.
In the event that you need to use the other printer, repeat the above
steps to set the port of the machine to "FILE:", and change the port
setting of the other printer back to "LPT1".
Note