e-STUDIO163/203 © 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
FUSER / EXIT UNIT
13 - 2
13.2 Configurations
Fuser / exit unit
Pressure roller unit Pressure roller PFA tube sponge roller ($25)
Periodic replacement part
Exit sensor (S5)
Fuser roller unit Fuser roller Fluoro-plastic coated roller ($30)
Periodic replacement part
Heater lamp (LAMP1, LAMP2) 564W+564W
Thermistor (THM1, 2, 3)
Fuser thermostat (THMO1) Non-contact type (170ºC)
Separation finger Periodic replacement part
Exit roller
To Next Page
Loading...
