2INSTALLATION
40 Installing the Printer Driver to the Local Client
11
Select the port to which your printer is connected.
Select [COM port] and click [Next].
y Specify the COM port which is set when installing the USB driver to your PC.
P.17 “Installing the USB Driver”
Example: COM3
y The new COM port will appear in the [Ports] section of Windows' [Device Manager],
you can open Device Manager to check what port number has been assigned as fol-
lows:
Windows 98 SE/Me: Click [Start], [Control Panel], [System], select the [Device
Manager] tab, expand the [Ports] branch.
12
Type the printer name and select whether or not you use e-STUDIO
163/203/165/205 as the default printer.
Rename the printer name if required. Click [Finish]. Files will be copied and installed.
To Next Page
Loading...
