2
© February 2007 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO166/206
OUTLINE OF THE MACHINE
2 - 29
2.7 Removal and Installation of Options
[A] MR-2017 (Automatic Document Feeder (ADF))
(1) Turn the power OFF and unplug the power
cable.
(2) Remove 1 screw and take off the connector
cover.
Fig. 2-37
(3) Remove the ground wire.
Fig. 2-38
(4) Disconnect the connector.
Fig. 2-39
To Next Page
Loading...
