Toshiba e-studio182 - Page 162

e-STUDIO182/212/242 © 2009 TOSHIBA TEC CORPORATION All rights reserved
PAPER FEEDING SYSTEM
9 - 26
(7) Take off the bracket of paper empty sensor.
 P.9-18 "9.5.11 Paper empty sensor (S7)"
(8) Release the harness from the harness
clamp, disconnect the connector, remove 3
screws, and then take off the registration
guide.
Fig. 9-55
(9) Remove the seal, release 2 latches, and take
off the registration sensor.
Fig. 9-56
Connector
Registration guide
Registration sensor
Seal