11
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO182/212/242
DEVELOPMENT SYSTEM
11 - 17
(11) Take off 4 gears and 1 timing belt.
Fig. 11-25
(12) Remove 1 E-ring, 1 pin and 1 pulley.
(13) Take off the guide roller on the rear side.
Fig. 11-26
(14) Remove the seal on the front side. Remove 1
E-ring and 1 bushing.
Fig. 11-27
(15) Take off the developer sleeve.
Fig. 11-28
Timing belt
GearGear
Pulley
Guide roller
E-ring
Pin
Seal
Bushing
E-ring
Developer sleeve
To Next Page
Loading...
