Toshiba e-studio182 - 5 Control Panel; General Description; 2009 TOSHIBA TEC CORPORATION All Rights Reserved E-STUDIO182;212;242

5
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO182/212/242
CONTROL PANEL
5 - 1
5. CONTROL PANEL
5.1 General Description
The control panel consists of button switches to operate the equipment and select various modes, and
LEDs and an LCD to display codes, values and the states (including each mode) of the equipment. The
button switches, the LEDs and an LCD are mounted on the control panel PC board (HPNL) and are
installed the inside of the control panel.
When the operator’s attention is required, graphic symbols appear with messages explaining the
condition of the equipment in the LCD panel.
Fig. 5-1