05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptabl
e value
SRAM Contents
Proce
dure
20L
23L /
25L
20H
23H /
25H
05 Adjustment
mode
Printer Image Margin adjustment PPC 4051 - Left margin 50 0-255 M When the value increases by "1", the blank area becomes
wider by approx. 0.042 mm.
1
YY
05 Adjustment
mode
Printer Image Margin adjustment PPC 4052 - Right margin 55 0-255 M When the value increases by "1", the blank area becomes
wider by approx. 0.042 mm.
1
YY
05 Adjustment
mode
Printer Image Margin adjustment PPC 4053 - Bottom margin 75 0-255 M When the value increases by "1", the blank area becomes
wider by approx. 0.042 mm.
1
YY
05 Adjustment
mode
Printer Image Margin adjustment PRINT 4054 - Top margin 24 0-255 M When the value increases by "1", the blank area becomes
wider by approx. 0.042 mm.
1
YY
05 Adjustment
mode
Printer Image Margin adjustment PRINT 4055 - Left margin 0 0-255 M When the value increases by "1", the blank area becomes
wider by approx. 0.042 mm.
1
YY
05 Adjustment
mode
Printer Image Margin adjustment PRINT 4056 - Right margin 0 0-255 M When the value increases by "1", the blank area becomes
wider by approx. 0.042 mm.
1
YY
05 Adjustment
mode
Printer Image Margin adjustment PRINT 4057 - Bottom margin 0 0-255 M When the value increases by "1", the blank area becomes
wider by approx. 0.042 mm.
1
YY
05 Adjustment
mode
Printer Image Leading edge
position adjustment
4058 - Upper drawer 28 0-40 M When the value increases by "1", the image shifts toward
the trailing edge of the paper by approx. 0.54 mm.
1
YY
05 Adjustment
mode
Printer Image Leading edge
position adjustment
4059 - Lower drawer (PFU) 8 0-15 M When the value increases by "1", the image shifts toward
the trailing edge of the paper by approx. 0.54 mm.
1
YY
05 Adjustment
mode
Printer Image Leading edge
position adjustment
4060 - PFP 8 0-15 M When the value increases by "1", the image shifts toward
the trailing edge of the paper by approx. 0.54 mm.
1
-Y
05 Adjustment
mode
Printer Image Leading edge
position adjustment
4061 - Bypass feeding 8 0-15 M When the value increases by "1", the image shifts toward
the trailing edge of the paper by approx. 0.54 mm.
1
YY
05 Adjustment
mode
Printer Image Leading edge
position adjustment
4062 - Duplexing feeding 8 0-15 M When the value increases by "1", the image shifts toward
the trailing edge of the paper by approx. 0.54 mm.
1
YY
05 Adjustment
mode
Printer Image Bottom margin
adjustment /
Reverse side at
duplexing
4064 0 Void adjustment 29 0-255 M When the value increases by "1", the blank area becomes
wider by approx. 0.0423 mm.
4
YY
05 Adjustment
mode
Printer Image Right margin
adjustment /
Reverse side at
duplexing
4064 1 Void adjustment 0 0-255 M When the value increases by "1", the blank area becomes
wider by approx. 0.0423 mm.
4
YY
e-STUDIO2006/2306/2506/2007/2307/2507
SELF-DIAGNOSIS CODE (03/04/05/08 CODE)
14-1-12
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
To Next Page
Loading...
