June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 69
2
430 Image Top margin adjustment
(blank area at the leading
edge of the paper)
PPC 0
<0-255>
M When the value
increases by “1”, the
blank area becomes
wider by approx.
0.0423 mm.
1
431 Image Left margin adjustment
(blank area at the left of the
paper along the paper
feeding direction)
PPC 0
<0-255>
M 1
432 Image Right margin adjustment
(blank area at the right of
the paper along the paper
feeding direction)
PPC 0
<0-255>
M 1
433 Image Bottom margin adjustment
(blank area at the trailing
edge of the paper)
PPC 0
<0-255>
M 1
434-0 Image Bottom margin adjustment
(blank area at the trailing
edge of the paper)/
Reverse side at duplexing
PPC/
PRT
29
<0-255>
M 4
434-1 Image Right margin adjustment
(blank area at the right of
the paper along the paper
feeding direction)/Reverse
side at duplexing
PPC/
PRT
29
<0-255>
M 4
435 Image Top margin adjustment
(blank area at the leading
edge of the paper)
PRT 24
<0-255>
M 1
436 Image Left margin adjustment
(blank area at the left of the
paper along the paper
feeding direction)
PRT 0
<0-255>
M 1
437 Image Right margin adjustment
(blank area at the right of
the paper along the paper
feeding direction)
PRT 0
<0-255>
M 1
438 Image Bottom margin adjustment
(blank area at the trailing
edge of the paper)
PRT 0
<0-255>
M 1
440 Laser Adjustment of
secondary
scanning
laser writing
start position
Upper
drawer
ALL 8
<Refer to
content>
M When the value
increases by “1”, the
image shifts toward the
leading edge of the
paper by approx.
0.2 mm.
<Acceptable value>
e-STUDIO232/282: 0-15
e-STUDIO202L: 0-40
1
441 Lower
drawer
ALL 21
<0-40>
M 1
442 Bypass
feeding
ALL 8
<0-15>
M 1
443 LCF ALL 8
<0-15>
M 1
444 PFP ALL 8
<0-15>
M 1
445 Duplex
feeding
ALL 8
<0-15>
M 1
Adjustment mode (05) <e-STUDIO202L/232/282>
Code
Classi-
fication
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Proce-
dure
05/11
To Next Page
Loading...
