June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 77
2
672-0 Image Adjustment of
printer image
density
Normal PRT 0
<0-10>
M Adjustment of the image
density.
With decreasing the
value, the text becomes
lighter.
4
672-1 PRT 4
<0-10>
M 4
672-2 PRT 5
<0-10>
M 4
672-3 PRT 6
<0-10>
M 4
672-4 PRT 10
<0-10>
M 4
676-0 Toner sav-
ing
PRT 0
<0-10>
M 4
676-1 PRT 2
<0-10>
M 4
676-2 PRT 3
<0-10>
M 4
676-3 PRT 4
<0-10>
M 4
676-4 PRT 5
<0-10>
M 4
693 Image Range correc-
tion on origi-
nal set on the
RADF
Text/Photo PPC EUR:12
UC:12
JPN:22
<11-14,
21-24,
31-34,
41-44>
SYS Sets whether the values
of the background peak
and text peak are fixed
or not. One’s place is an
adjustment for “auto-
matic density” and ten’s
place is for “manual den-
sity”. Once they are
fixed, the range correc-
tion is performed with
standard values.
The values of the back-
ground peak and text
peak affect the reproduc-
tion of the background
density and text density
respectively.
1: fixed/fixed
2: varied/fixed
3: fixed/varied
4: varied/varied
* Background peak/
Text peak
1
694 Photo PPC 12
<11-14,
21-24,
31-34,
41-44>
SYS 1
695 Text PPC 22
<11-14,
21-24,
31-34,
41-44>
SYS 1
700 Image Adjustment of
binarized
threshold
(Text)
Center
value
FAX 120
<0-255>
SYS When the value
increases, the image at
the center step becomes
lighter.
1
701 Light step
value
FAX 20
<0-255>
SYS When the value
increases, the image of
“light” side becomes
lighter.
1
702 Dark step
value
FAX 20
<0-255>
SYS When the value
increases, the image of
“dark” side becomes
darker.
1
Adjustment mode (05) <e-STUDIO202L/232/282>
Code
Classi-
fication
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Proce-
dure
05/11
To Next Page
Loading...
