June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 DATA CLONING with USB STORAGE DEVICE (e-STUDIO202L/232/282)
9 - 17
9
(16) "Restore Completed" is displayed on the LCD screen when the restore has been properly com-
pleted.
Fig. 9-24
(17) Turn the power OFF and remove the USB storage device.
<SRAM Data Restore>
(18) Connect the USB storage device to the USB connector (host) on the SYS board.
(19) Turn the power ON while pressing the [5] and [9] button simultaneously.
The screen to select the backup/restore items is displayed.
Fig. 9-25
Note: Note:
After the item is selected with the digital keys, displaying the next menu may take a long time.
05/11
To Next Page
Loading...
