Toshiba e-STUDIO203 - Page 43

December 2005 © TOSHIBA TEC e-STUDIO163/203 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 23
2
430 Image Top margin adjustment
(blank area at the leading
edge of the paper)
PPC 9
<0-255>
M When the value
increases by “1”, the
blank area becomes
wider by approx.
0.0423 mm.
1
431 Image Left margin adjustment
(blank area at the left of the
paper along the paper
feeding direction)
PPC 0
<0-255>
M 1
432 Image Right margin adjustment
(blank area at the right of
the paper along the paper
feeding direction)
PPC 110
<0-255>
M 1
433 Image Bottom margin adjustment
(blank area at the trailing
edge of the paper)
PPC 153
<0-255>
M 1
435 Image Top margin adjustment
(blank area at the leading
edge of the paper)
PRT 24
<0-255>
M 1
436 Image Left margin adjustment
(blank area at the left of the
paper along the paper
feeding direction)
PRT 0
<0-255>
M 1
437 Image Right margin adjustment
(blank area at the right of
the paper along the paper
feeding direction)
PRT 0
<0-255>
M 1
438 Image Bottom margin adjustment
(blank area at the trailing
edge of the paper)
PRT 0
<0-255>
M 1
440 Laser Adjustment of
secondary
scanning
laser writing
start position
Drawer ALL 14
<0-40>
M When the value
increases by “1”, the
image shifts toward the
leading edge of the
paper by approx.
0.2 mm.
1
441 PFU ALL 21
<0-40>
M 1
442 Bypass
feeding
ALL 8
<0-15>
M 1
450-0 Paper
feeding
Paper aligning
amount
adjustment at
the registra-
tion section
(Drawer/Plain
paper)
Long size ALL 22
<0-63>
M When the value
increases by “1”, the
aligning amount
increases by approx.
0.9 mm.
<Paper length>
Long size:
330 mm or longer
Middle size:
220 mm to 329 mm
Short size:
219 mm or shorter
4
450-1 Middle
size
ALL 22
<0-63>
M 4
450-2 Short size ALL 22
<0-63>
M 4
451-0 Paper
feeding
Paper aligning
amount
adjustment at
the registra-
tion
section (PFU/
Plain paper)
Long size ALL 14
<0-63>
M 4
451-1 Middle
size
ALL 14
<0-63>
M 4
451-2 Short size ALL 14
<0-63>
M 4
Adjustment mode (05)
Code
Classi-
fication
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Proce-
dure
06/02