Toshiba e-STUDIO203 - Page 46

e-STUDIO163/203 ERROR CODE AND SELF-DIAGNOSTIC MODE December 2005 © TOSHIBA TEC
2 - 26
535 Image Range correc-
tion/Text peak
adjustment
Text/Photo PPC 246
<0-255>
SYS When the value
decreases, the text
becomes darker.
1
536 Text PPC 254
<0-255>
SYS 1
537 Photo PPC 236
<0-255>
SYS 1
570 Image Range correc-
tion on origi-
nal manually
set on the
original glass
Text/Photo PPC EUR:12
UC:12
JPN:22
<11-14,
21-24,
31-34,
41-44>
SYS Sets whether the values
of the background peak
and text peak are fixed
or not. One’s place is an
adjustment for “auto-
matic density” and ten’s
place is for “manual den-
sity”. Once they are
fixed, the range correc-
tion is performed with
standard values. The
values of the background
peak and text peak affect
the reproduction of the
background density and
text density respectively.
1: fixed/fixed
2: varied/fixed
3: fixed/varied
4: varied/varied
* Background peak/
Text peak
1
571 Photo PPC 12
<11-14,
21-24,
31-34,
41-44>
SYS 1
572 Text PPC 22
<11-14,
21-24,
31-34,
41-44>
SYS 1
593 Image Gamma data
slope adjust-
ment
Text/Photo PPC 5
<1-9>
SYS Select the slope of
Gamma curve (The
larger the value is, the
larger the slope
becomes.)
1
594 Image Photo PPC 5
<1-9>
SYS 1
595 Image Text PPC 5
<1-9>
SYS 1
600 Image Background
adjustment
Text/Photo PPC 3
<1-9>
SYS When the value
decreases, the back-
ground becomes darker.
When the value
increases, the back-
ground becomes lighter.
1
601 Photo PPC 3
<1-9>
SYS 1
602 Text PPC 3
<1-9>
SYS 1
609 Image Switching of the scanner
Gamma correction table
when paper is fed from the
ADF
ALL 0
<0-4>
SYS The larger the value is,
the lighter the density of
the highlight areas
becomes.
1
Adjustment mode (05)
Code
Classi-
fication
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Proce-
dure
06/05