Toshiba e-STUDIO211 - Page 78

e-STUDIO181/211 © 2009 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 56
Items
PM management setting <Procedure 4>
*Indicated in 8 digits
Remarks
Upper Fuser roller bushing 361-0, 1, 3, 4, 6, 7 <Default values of code 361
Sub-code 0, 3, 6, 7: 0/0
Sub-code 1: 77,000/90,000
Sub-code 4: 180,000/180,000
Photoconductive drum 1150-0, 1, 3, 4, 6, 7 <Default values of code 1150
Sub-codes 0, 3, 6, 7: 0/0
Sub-code 1: 77,000/90,000
Sub-code 4: 180,000/180,000
Drum cleaning blade 1158-0, 1, 3, 4, 6, 7 <Default values of code 1158
Sub-codes 0, 3, 6, 7: 0/0
Sub-code 1: 77,000/90,000
Sub-code 4: 180,000/180,000
Drum separation finger 1172-0, 1, 3, 4, 6, 7 <Default values of code 1172
Sub-codes 0, 3, 6, 7: 0/0
Sub-code 1: 77,000/90,000
Sub-code 4: 180,000/180,000
Main charger grid 1174-0, 1, 3, 4, 6, 7 <Default values of code 1174
Sub-codes 0, 3, 6, 7: 0/0
Sub-code 1: 77,000/90,000
Sub-code 4: 180,000/180,000
Needle electrode 1182-0, 1, 3, 4, 6, 7 <Default values of code 1182
Sub-codes 0, 3, 6, 7: 0/0
Sub-code 1: 77,000/90,000
Sub-code 4: 180,000/180,000
Ozone filter 1198-0, 1, 3, 4, 6, 7 <Default values of code 1198
Sub-codes 0, 3, 6, 7: 0/0
Sub-code 1: 77,000/90,000
Sub-code 4: 180,000/180,000
Developer material 1200-0, 1, 3, 4, 6, 7 <Default values of code 1200
Sub-codes 0, 3, 6, 7: 0/0
Sub-code 1: 77,000/90,000
Sub-code 4: 180,000/180,000
Transfer charger wire 1214-0, 1, 3, 4, 6, 7 <Default values of code 1214
Sub-codes 0, 3, 6, 7: 0/0
Sub-code 1: 77,000/90,000
Sub-code 4: 180,000/180,000
Separation charger wire 1224-0, 1, 3, 4, 6, 7 <Default values of code 1224
Sub-codes 0, 3, 6, 7: 0/0
Sub-code 1: 77,000/90,000
Sub-code 4: 180,000/180,000
Fuser roller 1246-0, 1, 3, 4, 6, 7 <Default values of code 1246
Sub-codes 0, 3, 6, 7: 0/0
Sub-code 1: 77,000/90,000
Sub-code 4: 180,000/180,000
Pressure roller 1250-0, 1, 3, 4, 6, 7 <Default values of code 1250
Sub-codes 0, 3, 6, 7: 0/0
Sub-code 1: 77,000/90,000
Sub-code 4: 180,000/180,000
Fuser roller separation finger 1268-0, 1, 3, 4, 6, 7 <Default values of code 1268
Sub-codes 0, 3, 6, 7: 0/0
Sub-code 1: 77,000/90,000
Sub-code 4: 180,000/180,000
Feed roller
(Drawer)
1298-0, 1 <Default values of code 1298
Sub-codes 0: 0/0
Sub-code 1: 80,000/80,000
Feed roller
(PFU)
1300-0, 1 <Default values of code 1300
Sub-codes 0: 0/0
Sub-code 1: 80,000/80,000