Toshiba e-STUDIO211 - Page 79

2
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO181/211
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 57
Separation roller
(Bypass unit)
1316-0, 1 <Default values of code 1316
Sub-codes 0: 0/0
Sub-code 1: 80,000/80,000
Feed roller
(Bypass unit)
1324-0, 1 <Default values of code 1324
Sub-codes 0: 0/0
Sub-code 1: 80,000/80,000
Pickup roller
(Bypass unit)
1332-0, 1 <Default values of code 1332
Sub-codes 0: 0/0
Sub-code 1: 80,000/80,000
Recovery blade 1336-0, 1, 3, 4, 6, 7 <Default values of code 1336
Sub-codes 0, 3, 6, 7: 0/0
Sub-code 1: 77,000/90,000
Sub-code 4: 180,000/180,000
Items
PM management setting <Procedure 4>
*Indicated in 8 digits
Remarks