Toshiba e-studio212 - Page 59

2
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO182/212/242
OUTLINE OF THE MACHINE
2 - 33
[G-2] When PFP is installed
(12) Remove 1 screw and take off 1 fixing bracket
on the rear right side.
Fig. 2-55
(13) Lift up the equipment and take off the PFU.
Fig. 2-56
(1) Take off the rear cover.
 P.2-21 "2.5.10 Rear cover"
(2) Remove 1 ground wire and 2 connectors.
Fig. 2-57