05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptabl
e value
SRAM Contents
Proce
dure
23LA
23LM/
28LM
23HA /
28HA
05 Adjustment
mode
Scanner Scanner 3047 - Carriage position
adjustment during
scanning from RADF
(color)
128 0-255 M 1
YY
05 Adjustment
mode
Scanner RADF 3050 - Adjustment of the
RADF tray volume
(minimum)
20 0-255 M This is used for improving the detection accuracy of the
width of the original set on the original tray. The condition of
the sensor when the tray width is minimized is memorized.
The appropriate range of the adjustment value is between 0
and 100.
6
YY
05 Adjustment
mode
Scanner RADF 3051 - Adjustment of the
RADF tray volume
(maximum)
220 0-255 M This is used for improving the detection accuracy of the
width of the original set on the original tray. The condition of
the sensor when the tray width is maximized is memorized.
The appropriate range of the adjustment value is between
200 and 255.
6
YY
05 Adjustment
mode
Scanner RADF 3052 - Adjust ment for DF
trailing edge tolerance
(black)
115 0-255 M 1
YY
05 Adjustment
mode
Scanner RADF 3053 - Adjust ment for DF
trailing edge tolerance
(Color 600 dpi)
128 0-255 M 1
YY
05 Adjustment
mode
Scanner RADF 3054 - Adjust ment for DF
trailing edge tolerance
(Color 300 dpi)
132 0-255 M 1
YY
05 Adjustment
mode
Scanner Scanner LED 3219 - Light volume
adjustment
(color/black)
- - M Light volume adjustment of LED is performed.
Adjustment for color scans is performed after the
adjustment for a black scan.
6
YY
05 Adjustment
mode
Scanner Scanner LED 3220 - Light volume
adjustment (black)
- - M Light volume adjustment of LED is performed. Only
adjustment for black scans is performed.
6
YY
05 Adjustment
mode
Scanner Scanner LED 3221 - Light volume
adjustment (color)
- - M Light volume adjustment of LED is performed.
Only adjustment for color scans is performed.
6
YY
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
14-2-7
e-STUDIO2303A/2303AM/2803AM/2309A/2809A
SELF-DIAGNOSIS CODE (03/04/05/08 CODE)
To Next Page
Loading...
