e-STUDIO200L/202L/203L/230/232/233/280/282/283 © 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 160
255 Paper
feeding
PFP/LCF installation ALL 0
<0-4,
16-20,
32-36>
M Sets the installation sta-
tus of the PFP or LCF,
and also disables its
functions and the lower
drawer of the equip-
ment.
When "0" is set at 08-
477, specify the value
from 1 to 4 or 16 to 20,
and when "1" is set at
08-477, specify the
value only from 32 to
36.
0: Auto
When only the upper
drawer is installed as
the paper feeder of the
equipment.
1: PFP upper-drawer
type installed
2: PFP upper-drawer
and lower-drawer
type installed
3: LCF installed
4: Disables PFP or
LCF
When the upper and
lower drawers are
installed as the paper
feeder of the equip-
ment.
16: PFP and LCF not
installed
17: PFP upper-drawer
type installed
18: PFP upper-drawer
and lower-drawer
type installed
19: LCF installed
20: Disables functions
of PFP or LCF
Disables the lower
drawer when the upper
and lower drawers are
installed as the paper
feeder of the equip-
ment.
32: PFP and LCF not
installed
33: PFP upper-drawer
type installed
34: PFP upper-drawer
and lower-drawer
type installed
35: LCF installed
36: Disables functions
of PFP or LCF
1
256 Paper
feeding
Paper size setting /LCF ALL EUR: A4
UC: LT
JPN: A4
M Press the button on the
LCD to select the size.
9
Setting mode (08) <e-STUDIO202L/203L/232/233/282/283>
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Proce-
dure
05/11
To Next Page
Loading...
