Toshiba e-STUDIO233 - Page 105

© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 69
2
401 Laser Fine adjustment of polygo-
nal motor rotation speed
(adjustment of primary
scanning direction repro-
duction ratio)
PRT 136
<0-255>
M When the value
increases by “1”, the
reproduction ratio of pri-
mary scanning direction
increases by approx.
0.07%. (approx. 0.1 mm/
step)
1
405 PPC 134
<0-255>
M1
410 Laser Adjustment of primary
scanning laser writing start
position.
PPC 128
<0-255>
M When the value
increases by “1”, the writ-
ing start position shifts to
the front side by approx.
0.0423 mm.
1
411 PRT 153
<0-255>
M1
421 Drive Adjustment of secondary
scanning direction repro-
duction ratio
(fine adjustment of main
motor speed)
PPC/
PRT
129
<0-255>
M When the value
increases by “1”, the
reproduction ratio of sec-
ondary scanning direc-
tion increases by approx.
0.04%.
1
422 FAX 139
<0-255>
M1
424 Drive Fine adjustment of exit
motor speed
PPC/
PRT
160
<0-255>
M When the value
increases by “1”, the
rotation becomes faster
by approx. 0.05%.
1
425 FAX 121
<0-255>
M1
Adjustment mode (05) <e-STUDIO202L/203L/232/233/282/283>
Code
Classi-
fication
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Proce-
dure
07/11