e-STUDIO200L/202L/203L/230/232/233/280/282/283 © 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
PAPER FEEDING SYSTEM
9 - 30
[V] Side cover opening/closing detection sensor
(11) Remove 1 each of the bushing, gear, pin and
gear in order.
Note:
When installing the gear, engage the convex-
ity of the one-way clutch and concavity of the
gear.
Fig. 9-57
(12) Remove 4 screws and take off the transport
drive unit.
Fig. 9-58
(1) Take off the ADU
( P.15-10 "[A] Automatic Duplexing Unit
(ADU)").
(2) Take off the bypass unit
( P.9-17 "[G] Bypass unit").
(3) Release the latches and take off the side
cover opening/closing detection sensor.
Fig. 9-59
Bushing
Pin
Gear
Gear One-way clutch
Transport drive unit
Side cover
opening/closing sensor
To Next Page
Loading...
