Toshiba e-STUDIO233 - Page 237

9
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/232/233/280/282/283
PAPER FEEDING SYSTEM
9 - 31
[W] Registration roller
(1) Take off the front cover
( P.2-30 "[A] Front cover").
(2) Take off the process unit
( P.11-8 "[A] Process unit").
(3) Take off the ADU
( P.15-10 "[A] Automatic Duplexing Unit
(ADU)").
(4) Take off the bypass unit
( P.9-17 "[G] Bypass unit").
(5) Take off the transfer unit
( P.11-17 "[O] Transfer unit").
(6) Take off the SYS board case
( P.2-46 "[D] SYS board case").
(7) Take off the connecting port cover
( P.2-37 "[O] Connecting port cover").
(8) Take off the main motor drive unit
( P.10-5 "[B] Main motor drive unit").
(9) Take off the registration roller clutch
( P.9-25 "[S] Registration roller clutch").
(10) Remove 2 screws and take off the terminal
holder.
Fig. 9-60
(11) Release the latch and knob.
Fig. 9-61
Terminal holder
Knob