11
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/232/233/280/282/283
DRUM RELATED SECTION
11 - 13
[H] Drum
[I] Drum cleaning blade
(1) Take off the main charger
( P.11-11 "[D] Main charger").
(2) Rotate the lever while pushing its latch and
pull it out.
(3) Take off the drum.
Notes:
1. Be careful not to touch, spit or scratch the
drum surface.
2. Avoid direct light. Place the drum in a
dark place immediately after taking off.
3. Be careful not to touch or scratch the
edge of the cleaning blade.
Fig. 11-18
(1) Take off the drum
( P.11-13 "[H] Drum").
(2) Remove 2 screws and take off the drum
cleaning blade.
Note:
Be careful not to touch or scratch the edge of
the drum cleaning blade.
Fig. 11-19
Drum
Lever
Drum cleaning blade
To Next Page
Loading...
