Toshiba e-studio2330c Service Handbook

8
© 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C
FIRMWARE UPDATING
8 - 11
(8) Press the [ON/OFF] button to shut down the equipment, and then remove the USB media.
(9) Perform the initialization of the updating data.
• Press the [ON/OFF] button while simultaneously holding down the [0] and [8] buttons.
• Key in “947”, and then press the [START] button.
• Press the [INITIALIZE] button.
M00 Other error Other error
Scanner update Error
Error number Error message Error content
S01
Time out
(When the download is requested)
Communication timeout
(When the download is requested)
S02
Time out
(When the download is written)
Communication timeout
(When the download is written)
S03
Time out
(When the download is finished)
Communication timeout
(When the download is finished)
S05
Deletion error
(When the download is written)
Deletion error
(When the download is written)
S06
Writing error
(When the download is written)
Writing error
(When the download is written)
S08
Reception status code abnormality
(When the download is requested)
Reception status code abnormality
(When the download is requested)
S09
Reception status code abnormality
(When the download is written)
Reception status code abnormality
(When the download is written)
S10
Reception status code abnormality
(When the download is finished)
Reception status code abnormality
(When the download is finished)
S00 Other error Other error
Engine update Error
Error number Error message Error content

Toshiba e-studio2330c Specifications

General

Brand	Toshiba
Model	e-studio2330c
Category	All in One Printer
Language	English