Toshiba e-studio2330c Service Handbook

e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C © 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved
FIRMWARE UPDATING
8 - 12
[B] Confirmation of the updated data
After the updating is completed, check each data version in the Setting Mode (08) to confirm that the
data were overwritten properly.
 P.8-56 "8.4 Confirmation of the updated data"
[C] Adjustment
Perform the adjustment of the equipment.
• Performing Image Quality Control (05-396):
 P.3-4 "3.1.3 Performing Image Quality Control (ICQ)"
• Adjustment of Color Registration Control (05-4719):
 P.3-6 "3.1.4 Adjustment of Color Registration Control"
• Automatic gamma adjustment <PPC> (05-1642) (using [4][FAX] test pattern):
 P.3-29 "3.2.1 Automatic gamma adjustment"
• Automatic gamma adjustment < PRT > (05-1008) (using [70][FAX] test pattern):
 P.3-44 "3.3.1 Automatic gamma adjustment"

Toshiba e-studio2330c Specifications

General

Brand	Toshiba
Model	e-studio2330c
Category	All in One Printer
Language	English