Toshiba e-studio2507 - Page 710

05/08 Mode Element Sub element Item Subitem Code
Sub-
code
Details
Default
value
A
cceptable
value
SRAM Contents
Proce
dure
23LA
23LM/
28LM
23HA/
28H
A
08 Setting
mode
System Network LPD 9475 - Availability of LPD
client
1 1-2 NIC 1: Valid
2: Invalid
12 - Y Y
08 Setting
mode
System Network IPP 9478 - Availability of IPP 1 1-2 NIC 1: Valid
2: Invalid
12 - - Y
08 Setting
mode
System Network IPP 9481 - IPP printer name MFPserial - NIC Maximum 127 letters
The network-related serial number of the equipment
appears at "serial"
12 - Y Y
08 Setting
mode
System Network 9525 - Display of MAC
address
- - - (**: **: **: **: **: **)
The address is displayed as above. 6-byte data is divided
by colon.
2-YY
08 Setting
mode
System Network DHCP 9581 Enabling server's IP
address acquired by
DHCP
1 1-2 - NetBIOS over TCP/IP Name Server option (44) = Primary
and Secondary Wins NAME
1: Enabled
2: Disabled
This value is used only when DHCP is enabled.
12 - - Y
08 Setting
mode
System Network SMTP 9584 SMTP Server Option
(69) Simple Mail Server
Address
2 1-2 - OFF/ON
1: Valid
2: Invalid
12 - - Y
08 Setting
mode
System Network POP3 9585 POP3 Server Option
(70) Post Office Server
Address
2 1-2 - OFF/ON
1: Valid
2: Invalid
12 - - Y
08 Setting
mode
System Maintenance General 9601 - Equipment number
(serial number) display
- 9 digits SYS Fist digit: Production country (fixed)
Second digit: Model (fixed)
Third digit: Month (variable)
Fourth to ninth digit: serial number (variable)
This can be also entered with 05-9043.
11YYY
08 Setting
mode
System Maintenance Remote-controlled
service
9604 - Enabling/disabling a
service notification
1 0-1 SYS 0: Disabled
1: Enabled
<Default value>
NAD/MJD: 1
Others: 0
1- -Y
08 Setting
mode
System Maintenance RDMS 9605 - Sending error contents
of equipment
0 0-1 SYS 0: Disabled
1: Enabled
1- -Y
08 Setting
mode
System Maintenance Remote-controlled
service
9606 - Setting total counter
transmission interval
- - SYS (Hour/Hour/Minute/Minute) 1 - - Y
08 Setting
mode
System Maintenance Remote-controlled
service
9607 - Email destination
address 2
- - SYS Maximum 192 letters 11 - - Y
08 Setting
mode
System Maintenance Remote-controlled
service
9608 - Email destination
address 3
- - SYS Maximum 192 letters 11 - - Y
e-STUDIO2303A/2303AM/2803AM/2309A/2809A
SELF-DIAGNOSIS CODE (03/04/05/08 CODE)
14-2-94
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved