Finishing options > 55
B
ANNER
PRINTING
This feature enables printing on standard sized banner media.
The multipurpose tray is used for feeding banner media sizes.
Some applications software may not produce the desired results with banner print media
sizes, and some experimentation may be required to obtain the results you want.
1. In the driver’s Setup tab, select the required banner size from the Size drop-down
list.
2. From the Source drop-down list select Multipurpose tray.
3. Click OK to accept and close the Printing Preferences window.
NOTE
If this feature is not available in the driver, you may still print on banner media
using the Custom Page Size feature. See “Custom page size” on page 56.
Banner 297 x 1200 mm
MP Tray
To Next Page
Loading...
