Finishing options > 57
4. You can also position the page image on the paper to avoid printing too close to the
edge by choosing an Offset.
Offset relative to perpendicular direction adds to your left margin.
Offset relative to parallel direction adds to your top margin (normal feed) or bottom
margin (flipped feed).
5. Click OK to close the PostScript Custom Page Size Definition window.
6. Click OK to close the Advanced Options window.
7. In the driver’s window, choose the Multipurpose Tray as the Paper Source.
W
INDOWS
PCL
1. In the driver’s Setup tab, select any previously saved settings you wish to use.
2. Click the Paper Feed Options button.
3. In the Paper Feed Options window, click Custom Size.
If you have previously saved any special custom sizes they will be listed in the
Custom Size window.
4. To use a previously saved custom size, click its name in the list.
To create a new custom size:
(a) Enter its dimensions in the Width and Length boxes.
(b) Enter a name for the new size in the Name box, and click Add to save it in the
list.
5. Click OK to accept your chosen size and close the Custom Size window.
6. If this is the size of your document but you want to scale it to fit a standard size of
paper, click Resize document to fit printer page in the Paper Feed Options
window, and choose the printer’s actual paper size from the Conversion drop-down
list.
To Next Page
Loading...
