Finishing options > 66
T
O
PRINT
USING
A
WATERMARK
1. In the Watermarks window, click the watermark’s name in the list.
2. Click OK to close the Watermarks window.
3. Click OK to close the Printer Properties window.
4. Print your document.
T
RAPPING
Trapping is the process of adjusting the area where colors meet to compensate for
registration problems when printing C, M, Y and K layers. Trapping can prevent unwanted
white gaps or color lines between overlapping objects.
W
INDOWS
PCL & PS
1. Select the driver’s Job Options tab.
2. Choose the Trapping option you need from the drop-down list.
(a) Off; Trapping is disabled (default setting).
(b) Wide; A wide overlap is applied between the foreground and background
objects. If this causes noticeable overlaps on your print, use the Narrow setting
instead.
(c) Narrow; A narrow overlap is applied between the foreground and background
objects. If unwanted white gaps or color lines are still visible on your print, use
the Wide setting instead.
NOTE
1. Trapping can only be used when the Print Quality is set to the ProQ
setting.
2. If white lines appear when the foreground object is 100% black text, you
should also enable the Black Overprint feature (See “Black overprint” on
page 14.).
WINDOWS PCL
WINDOWS PS
To Next Page
Loading...
