5.VARIOUS FUNCTIONS
User Functions Menu List 147
5 VARIOUS FUNCTIONS
WALKUP SCREEN COPY, SCAN Sets the start screen.
TIMERS AUTO POWER SAVE 1, 3, 4, 5, 7, 10, 15, 20, 30, 45,
60
Sets the period of time (in
minutes) that this equipment
should wait before low power
mode is activated.
SLEEP MODE 1, 3, 5, 10, 15, 20, 25, 30, 40,
50, 60
Sets the period of time (in
minutes) that this equipment
should wait before sleep mode
is activated.
AUTO CLEAR 15, 30, 45, 60, 75, 90, 105,
120, 135, 150
Sets the time (in seconds) to
clear the previous settings and
return to the main screen.
WEEKLY TIMER OFF, ON (SUNDAY,
MONDAY, TUESDAY,
WEDNESDAY, THURSDAY,
FRIDAY, SATURDAY)
Sets the time to enter energy
saving mode and the time to
exit the energy saving mode for
each day from Sunday to
Saturday.
DEPARTMENT
CODE
YES MASTER
CODE/
DEPARTMENT
CODE
NUMBER (01 to 99) Sets the department number in
the range from "2" to "99". ("01"
is already registered as the
master code (administrator's
code).)
NAME (max 20 characters) Enter the department name.
P.131 “Character entry”
CODE (5 digits) Sets the 5-digit number for
master code or department
code. Entered numbers are
displayed as asterisks (*).
Existing codes cannot be
entered.
Do not forget this 5-digit
number for master code
because it is required for
setting or deleting each
department code.
NO - Department code is not set.
POP UP DRAWER SET ENABLE, DISABLE Sets whether to display a pop-
up message on the LCD screen
in the following cases.
When the size of paper
loaded in the drawer differs
from setting.
When a paper misfeed
occurs.
PAPER JAM
RECOVERY
ENABLE, DISABLE
LCD CONTRAST -3 (Light) to +3 (Dark) Sets the brightness of LCD
panel.
Menu Functions Settings Description
To Next Page
Loading...
