9
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
DRIVE SYSTEM
9 - 15
(11) Take off the fuser unit ( P.16-19 "[A] Fuser
unit").
(12) Remove 1 screw and take off the bracket.
Fig. 9-25
(13) Loosen 1 setscrew and disconnect 1 connec-
tor.
(14) Release the harness from 1 harness clamp.
Fig. 9-26
(15) Take off the registration clutch.
Fig. 9-27
Bracket
Setscrew
Registration clutch
To Next Page
Loading...
