13
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
REVOLVER UNIT
13 - 13
(15) Remove the stopper attached on the front
side of the revolver unit rotary shaft.
(16) Push in the bearing to the inside of the frame
and come it off from the frame.
Fig. 13-17
(17) Slide the revolver unit to the front and take
off the revolver unit.
Fig. 13-18
Stopper
Bearing
Revolver unit
To Next Page
Loading...
