Toshiba e-studio281c - Page 69

2
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
OUTLINE OF THE MACHINE
2 - 49
[C] KD-1012 (Large Capacity Feeder (LCF))
(8) Remove 4 screws and take off 2 fixing brack-
ets on the front side.
Fig. 2-89
(9) Lift up the equipment and take off the PFP.
Fig. 2-90
(1) Turn OFF the power and unplug the power
cable.
(2) Remove 1 screw and take off the connector
cover of the equipment.
Fig. 2-91
Fixing bracket
Fixing bracket
Connector cover