Toshiba e-studio281c - Page 84

e-STUDIO281c/351c/451c © 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
2 - 64
[I] MJ-6101 (Hole punch unit)
(10) Remove 2 screws.
Fig. 2-134
(11) Lift up the punch unit and take it off.
Fig. 2-135
(1) Turn OFF the power and unplug the power
cable.
(2) Take off the connector cover and disconnect
the connector.
Fig. 2-136
Connector cover
06/07