e-STUDIO281c/351c/451c © 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
2 - 66
(6) Take off the finisher with the hole punch unit.
Note:
Be careful not to fell the finisher when mov-
ing only the finisher unit.
Fig. 2-140
(7) Remove 1 screw and take off the connector
cover.
Fig. 2-141
(8) Disconnect 1 connector.
Fig. 2-142
Connector cover
06/07
To Next Page
Loading...
