2 Installing Client Software for Windows
46 Installing Client Software for Raw TCP/LPR Printing
8
Click [Finish].
y The screen returns to the Printer Ports dialog box.
9
Click [Close] to close the Printer Ports dialog box.
y If you are using Windows Vista and the LPD Print setting is enabled, you can also
configure LPR printing. To configure LPR printing, follow the procedure on the Tip
after Step 7.
10
Make sure the created Raw TCP or LPR port is checked in the “Print
to the following port(s)” list and click [Close].
Before using the printer driver for printing, please configure the installed options of the
equipment and department code (if required) on the printer driver.
P.200 “Before Using the Printer Driver”
To Next Page
Loading...
