3
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/232/233/280/282/283
COPY PROCESS
3 - 7
- Magnetic roller
Magnetic brush development
The south and north poles are arranged inside the magnetic roller as shown in the right figure.
The developer material forms a brush-like fluff which contacts the photoconductive drum surface.
This is caused by the magnetic force lines between the south and north poles.
Fig. 3-13
N
S
S
Magnetic force
line
Magnetic roller
Photoconductive
drum
To Next Page
Loading...
