Toshiba e-STUDIO283 - Page 285

12
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/232/233/280/282/283
DEVELOPMENT SYSTEM
12 - 15
(9) Remove 1 E-ring and take off the guide roller
on the front side.
Fig. 12-22
(10) Remove 1 E-ring. Remove the arm and cam.
Fig. 12-23
(11) Remove 1 screw and the gear.
Fig. 12-24
E-ring Guide roller
E-ring
Arm
Cam
Gear