2.HOW TO MAKE COPIES
Placing Originals 27
2 HOW TO MAKE COPIES
Single feed mode
When the feeding mode is set at “single feed mode”, an original is fed automatically as it is placed on the RADF (optional).
It is useful when you want to copy only 1 original sheet.
P.123 “ADF -> SADF”
3
If there is another original, insert it in the same way.
The original is pulled in whether or not you press [YES].
4
After all the originals are pulled in, press [FINISHED].
Even if you do not press [FINISHED], copying will start when the current operation is cleared by means of the
automatic function clear.
P.51 “Clearing all settings changed”
1
Align the side guides to the original length.
2
Insert the original with its face up and straight along
the side guides.
The original is automatically pulled in and then the menu of step 3 will
be displayed on the touch panel.
Be sure to let go of the original when it starts being pulled.
To Next Page
Loading...
Need help?
General
