2.PRINTING FROM WINDOWS
Setting Up Print Options 43
2 PRINTING FROM WINDOWS
1) Tab Manufacturer
Select the product name of the tab paper that you use. This equipment supports following tab paper.
If you use tab papers other than those above, select [Custom]. When you select [Custom], you must
specify the tab extension manually.
2) Tab Extension
Enter the width of the tab extension. This must be set only when [Custom] is selected in the [Tab
Manufacturer] option.
3) Image Shift Width
Enter the width to shift the printed image.
For example, if you want to print text on the tab extension of Letter Tab paper, create a Letter sized
document and input the text on the right side. Specify the distance the printed image is shifted in printing
on tab paper.
When creating a document for tab printing, you must place the text at the exact height to fit the tab
extension.
The selectable range of the edge margin differs depending on the model. See the following for
setting this option:
- For the e-STUDIO6570C Series, e-STUDIO6550C Series, e-STUDIO4540C Series,
e-STUDIO2550C Series, e-STUDIO2551C Series, and e-STUDIO5055C Series
The margin between the shifted text and right edge of the tab extension must have at least 0.17
inches (4.2 mm) of space because any data in this space are not printed. Enter the same value in
the [Tab Extension] box and the [Image Shift Width] box.
- For the e-STUDIO507 Series, e-STUDIO456 Series, e-STUDIO857 Series and e-STUDIO856
Series
The margin between the shifted text and right edge of the tab extension must have at least 0.08
inches (2.0 mm) of space because any data in this space are not printed. Enter the same value in
the [Tab Extension] box and the [Image Shift Width] box.
For models other than the above, refer to the corresponding Printing Guide.
4) Units
Select the unit for the Tab Extension and Image Shift option. The default unit varies depending on the
regional setting of the client computer.
For Letter Tab: Blanks USA copy Tabs (5 Banks) LT + 1/2" Tab
Blanks USA copy Tabs (8 Banks) LT + 1/2" Tab
For A4 Tab: KOKUYO A4-S (5 Banks)
King JIM A4-S (5 Banks)
Tab Te xt
Document Printed Image
Tab Te xt
Width of Tab Extension = Image Shift Margin
At least 0.17" or 4.2 mm
Must exactly
fit the tab extension
Tab Te xt
Document Printed Image
Tab Te xt
Width of Tab Extension = Image Shift Margin
At least 0.08" or 2.0 mm
Must exactly
fit the tab extension
To Next Page
Loading...
